Inquiry Basket (
Product List (Total 100 Products)
DQM-17
Saw Blade For Wood Cutting
Wood Cutting Cutting quality: Very good
Scope of best use: Cutting sandwich laminate, pine wood etc. Medium soft wood
Inapplicable ...
Last Updated: 2009-10-06
DQM-10
Saw Blade For Veneer Board Cutting
Veneer board Cutting quality: Excellent
Scope of best use: Medium soft wood, hard wood and common hard board and veneer ...
Last Updated: 2009-10-06
Specialized at the cutting and the smashing for the manual, the self-automatic, and the fully automatic finger jointers. Assembled by one saw blade and one cutter.
Last Updated: 2009-10-06
Teeth pattern: Cross bevel teeth. Specialized at the transversal cutting for the kiln-dried boards. The blades are so super thin that need to utmost avoid colliding.
Last Updated: 2009-10-06
DQ-04
For Panel saw scrolling.
Teeth pattern: ladder-shaped. Applied to the scrolling of the panel saw (Asian Model)
Last Updated: 2009-10-06
DQ-11
Teeth pattern: Cross bevel teeth. Specialized for the scrolling of the sliding table saw (two rip assembler).Includes one rip of the 0.2m/m, one of 0.1m/m and two rips ...
Last Updated: 2009-10-06
Teeth pattern: ladder-shaped flat teeth. Specialized at the cutting for the hollow aluminum frame and the solid aluminum.
Last Updated: 2009-10-06
Teeth pattern: Ladder-shaped flat teeth. Applied to the overlap cutting for the low density board, the medium density fiberboard (MDF), the high density board, and the plywood, ...
Last Updated: 2009-10-06
Teeth pattern: Cross bevel teeth. Applied to the transversal or vertical cutting the plywood without the scrolling saw.
Last Updated: 2009-10-06
Teeth pattern: The five assemblers of the left, the right. The left, the right and the flat blades. Specialized at the groove finisher of the board.
Last Updated: 2009-10-06